Tecno Spark 5 Air Firmware Download


In this post, you will find the download link for Tecno Spark 5 Air firmware file, stock ROM or flash file to fix any software related issues on your device. The Tecno Spark 5 firmware is completely free to download.

Tecno Spark 5 Air is a 6.6-inch display device that runs Android 10 with HiOS 6.1 ontop. It is powered by an octa-core processor paired with 2GB of RAM and 32GB of storage. The device packs a quad-camera setup with a 13MP primary lens and an 8MP selfie camera.

The Spark 5 Air houses a 5,000mAh battery with standard fast charge. Other features include fingerprint sensor and face unlock, 3.5mm headphone, dual 4G LTE with VoLTE.

With the Tecno Spark 5 Air firmware, you can:

  • Upgrade or downgrade your OS version
  • Restore factory default settings
  • Recover your device from a brick (whether soft or hard brick)
  • Fix hanging or boot loop caused by either a system update or changes you made in your device core files or apps
  • Remove virus/malware from the device.
  • Completely unroot your device.
  • Reset FRP
  • For modifying your system files.
  • Fix IMEI and baseband issues etc.
READ:  PitchBlack 3.1.0 TWRP For Tecno Pouvoir 2 LA7 (TWRP 3.5.1)

If you’re planning to root your Spark 5 Air device, you must have the firmware file. The Tecno Spark 5 Air firmware file will help you recover from bootloops and bricks while trying to obtain root access on the device.

Device Information:

Tecno Spark 5 KD7h firmware
Tecno Spark 5
  • Name: Tecno Spark 5 Air
  • Model: KD6, KD6A
  • Chipset: MediaTek Helio A22
  • Kernel: N/A
  • OS version: Android 10
  • Bootloader: Locked

Firmware Information:

  • Device Supported: Tecno Spark 5 Air
  • Device model: KD6, KD6A
  • Tool Supported: SP Flash Tool, After sales flash tool, Miracle box etc.
  • Android OS: 10 – Gapps File: Included
  • File: Factory Signed

Things You Need To Do Before Flashing The Tecno Spark 5 Air Firmware

  • Before downloading the Tecno Spark 5 Air firmware file, check your device build number and makes sure it matches the build below.
  • Backup all your important files and data before flashing because the flashing process will erase your device.
  • Use the latest flashing tools to flash the firmware flash file, so you don’t encounter any error during the process.

Tecno Spark 5 Air Firmware Download Links

  • Build: KD6-H6116GHIL-QGo-OP-200528V252 | Download
  • Build: KD6a-H6118AC-QGo-OP-200506V145 | Download

How to flash Tecno Spark 5 KD6/KD6A Firmware

Before flashing the Tecno Spark 5 factory firmware/flash file on your device, you need to have the following;

  • Android Vcom drivers installed on your PC
  • AfterSales Flash tool (Recommended)
  • SPFlashtool (smartphone flash tool)
  • Miracle box or any other smartphone box
  • A PC and of course a USB cable
READ:  PitchBlack 3.1.0 TWRP For Tecno Pouvoir 2 LA7 (TWRP 3.5.1)

Steps to Flash Tecno Spark 5 KD7h Firmware

  1. Download Tecno Spark 5 Air firmware from the above link
  2. Extract the downloaded firmware flash file to a folder on your desktop
  3. Launch the latest SP flash tool or after-sales flash tool
  4. Load your scatter file from the menu
  5. Wait for the firmware files to load completely
  6. Once the component files have been loaded into the flash tool/after-sales tool, set the download option to download only
  7. Now, click on the start button to commence the flashing process
  8. Power off your device and connect to the PC via USB cable.
  9. If vcom drivers are properly installed, SPFT /AfterSale tool will detect your device and begin the download process
  10. Do not interrupt this download process for any reason.
  11. Once the download process is complete, you’ll get a green circle pop-up on the screen/ok.
  12. You can now disconnect your device from PC/laptop and power on.
  13. The first boot might take a while, it’s nothing to worry about. It should take around 5-10minutes, so don’t panic.

That’s it you’ve successfully restored your Tecno Spark 5 Air device. If you encounter any problems downloading or flashing the Tecno Spark 5 Air firmware/stock ROM, let us know in the comment section below, and we’ll get back to you ASAP!.

6 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here