Tecno Camon iSky 3 Factory Signed Firmware Download

Searching for Tecno Camon iSky 3 factory firmware file? You’ve landed on the right page. This page contains Tecno Camon iSky 3 firmware how and to flash the firmware with flash tools. Camon iSky 3 firmware file can be used to restore your device from a dead (no boot) state, remove virus and malware that may be causing your device to malfunction or recover from a brick. Flashing the iSky 3 signed firmware file will restore your device to its factory original state.

Tecno Camon iSky 3 is an incredible device, it spots a lot of impressive features for a very portable price. In my own opinion, this device is the Camon 11 with a camouflaged name, read the full review here.

Why you need Tecno Camon iSky 3 firmware file

Tecno Camon iSky 3 firmware file can be used for a lot of reasons, some includes;

  • Recover your device from a brick (whether soft or hard brick).
  • Fix bootloop caused by either a system update or changes you made in your device core files or apps.
  • To upgrade or downgrade your OS version on your Tecno Camon iSky 3 device.
  • To fix bugs, remove virus and lags on your Android Device.
  • Remove FRP
  • Fix imei and baseband issues etc.

Device Information:

  • Name: Tecno Camon iSky 3
  • Model: KB3
  • Chipset: MediaTek MT6761
  • Kernel:
  • Stock OS version: Android 9 Pie
  • Bootloader: Locked

Firmware Information:

  • Device Supported: Tecno Camon iSky 3
  • Tool Supported: SP Flash Tool, Aftersales flash tool, Miracle box etc
  • Processor: MediaTek MT6761
  • Android OS: Android 9 Pie
  • Gapps File: Included
  • File: Factory Signed

Tecno Camon iSky 3 Factory signed Firmware Download

Build – KB3-H624A-P-190122V206 

How to flash Tecno Camon iSky 3 Firmware

To Flash the Camon iSky 3 factory signed firmware, you need to have the following;

  • Android Vcom drivers
  • AfterSales Flash tool (Recommended)
  • SPFlashtool (smartphone flash tool)
  • A PC / Laptop
  • A USB cable

Steps to Flash Tecno Camon iSky 3 Firmware

  1. If you haven’t downloaded Tecno Camon iSky 3 factory firmware already, simply download from the above links.
  2. Once you’ve downloaded, extract the firmware to a folder on your desktop or anywhere you want it.
  3. Launch AfterSales/SPFlashTool flash tool and load iSky 3s scatter file
  4. Once the component files have been loaded into the flash tool, set the download option to download only.
  5. Now, click on the start button to commence the flashing process.
  6. Next power off your device and connect to the PC via USB cable
  7. If your vcom drivers are properly installed, SPFT /AfterSale tool will detect your device and being a download process on screen.
  8. Do not interrupt this download process for any reason.
  9. Once the download process is complete, you’ll get a green circle pop-up on the screen/ok.
  10. You can now disconnect your device from PC/laptop and power on.
  11. The first boot might take a while, it’s nothing to worry about. It should take around 5-10minutes, so don’t panic.
  12. That’s it you’ve successfully restored you Tecno Camon iSky 3.

If the above guide is not clear enough, please refer to our detailed guide on how to flash a device using sp flash tool here. Kindly subscribe to receive more firmware updates and our upcoming tutorial on how to flash new MediaTek devices with AfterSales smartphone flash tool.

Leave A Reply

Please enter your comment!
Please enter your name here